Black & White Snakeskin Real Leather Snap On Belt 1.5 inch/38mm - With Buckle
Black & White Snakeskin Real Leather Snap On Belt 1.5 inch/38mm - With Buckle
These white & black snakeskin style belts are handmade in England (UK) using real genuine leather. The belt strap has been designed specifically for attaching different interchangeable buckles, this is achieved by the use of press-stud fastenings allowing the belt to accept any snap on belt buckle. These belts have a width that measures 1½ inches (38mm), which is the standard size that will most jeans. Completed with 7 punch holes measuring 1 inch (25mm) apart to adjust for different waist sizes. This belt is the ultimate accessory, ready for you to add any belt buckle to it, giving you the added bonus of changing your belt buckle at anytime to match your look.
The belt size guides below is for the standard buckle provided with the belt, it measures to the first and last punch hole on the belt. If you intend to change the buckle please add the length of the belt stated below to the length of the belt buckle you intended to use and then minus the length of the original buckle which is 1 inch or 2.5cm.
Approximate belt length with the standard buckle provided, in inches:
- Small size: 29 - 35
- Medium size: 33 - 39
- Large size: 38 - 44
- X Large size: 42 - 48
Approximate belt length with the standard buckle provided, in cm:
- Small size: 73.5 - 88.5
- Medium size: 83.5 - 99
- Large size: 96.5 - 111.5
- X Large size: 106.5 - 122
Disclaimer: Belts are handmade, please allow up to 1 inch or 2.5cm of variation from the size guide provided.
If you like a different belt buckle for this awesome belt, please check out the awesome Belt Buckle section of the Pangothic+ store.
If would like a different belt and can't find one you like here on Pangothic+, please check out our sister store Blaize Buckles.
This item is shipped from the UK